All the materials needed to make LED electronic display
Author:Zhang Ru Time:2021-09-12 14:37 Browse(716)
In the case of dot matrix displays.
In the case of dot matrix displays
indoor: 1. Outer frame (at present, most enterprises use stainless steel and aluminum alloy)
2. Cell board
3. Lattice block (with many specifications, mainly depending on the place of use; It is also divided into indoor super brightness, high brightness and general brightness
4. Power supply (+ 5V, depending on the size of the screen)
5. Angle aluminum (20 * 30MM, 25 * 25MM are used more often)
6. Wire (generally 1 square or more)
7. Install the bracket

outdoor: 1. Outer frame (at present, most enterprises are made of stainless steel and aluminum alloy)
2. Cell board

All the materials needed to make LED electronic display

3. Lattice block (with many specifications, mainly depending on the place of use; It is also divided into outdoor super brightness, high brightness and general brightness
4. Power supply (+ 5V, depending on the size of the screen)
5. Angle aluminum (20 * 30MM, 25 * 25MM are used more often)
6. Wire (generally 1 square or more)
7. Install the bracket

there is also a semi outdoor display

I have done these displays in my company. I hope the above can help
http://www.gzshanye.com
Related topics