How to set the scrolling caption of electronic display screen
Author:Simple group Time:2021-09-12 17:54 Browse(998)
If you use USB to change the subtitle of LED display, you have to use the software corresponding to the control card. Otherwise, you can't change the subtitle. If it's not too troublesome, you can open the screen and look at the control card inside
If you use USB to change the subtitle of LED display, you have to use the software corresponding to the control card. Otherwise, you can't change the subtitle. If it's not too troublesome, you can open the screen and see the control card inside. Which manufacturer's control card do you use? However, the settings of all manufacturers are similar. There are several ways you can try
first, after you edit the program (text), the text retention time is set to 0, so that the text will not stay when it passes from left to right, but the bad thing is that there will be a gap between the two programs. Let's see if that's the case with the control card you're using<

How to set the scrolling caption of electronic display screen

secondly, after editing a program (text), you can set other entry and exit modes. You don't have to enter from the left, for example, from the bottom to the top. In this way, the effect of the text will be much better, but the speed should be set as slow as possible
thirdly, make your screen wider (than it is) until you can put all the words you write on it. For example, your display screen is only 256 points wide, but when you set it, you can set it to 512 points wide, which will not have any effect on the display, and the text you write can be transmitted all the time
it's very flexible and not complicated. Anyway, as long as you set it well and appropriately, you can set it any way
if there is anything else I can do for you, please let me know.
Hot labels
Related topics