How to search channel lcd-46lx840a for sharp TV
Author:Murphy.Wu Time:2021-09-11 15:44 Browse(62)
Press TV / video on the sharp TV remote control to select a channel. If the TV has no channel to choose, press menu, turn right to settings, then look down for channel settings, and confirm (enter) to search automatically. Sharp TV will start to search channels automatically.
Press "TV / video" on the sharp TV remote control to select a channel.

How to search channel lcd-46lx840a for sharp TV

if there is no channel for TV to select.
press the remote control options list (menu), then turn right to settings, then look down for channel settings, and confirm (enter) to search automatically, The sharp TV starts to search channels automatically.
.
.
it's relatively simple to use the online on demand function of sharp TV.
before networking, it's better to have a router at home, so that when you use the TV to surf the Internet, it doesn't affect the computer to surf the Internet. The most important function of the router is that the network has been connected, and the cable can be directly inserted into the TV, The next step is to plug the network cable into the network interface on the TV.
complete the above steps, The hardware preparation of TV Internet access is completed.
then the software setting steps are as follows:
.
Step 1: turn on the network part of the device.
.
Step 2: turn on the TV and press the "network / USB" key to enter.
when you enter the "network / USB" state for the first time, the content of "Disclaimer" will be displayed.
please select "accept", if you select "reject", the "Disclaimer" will be displayed, The internal network circuit of the machine will stop working, and there is no way to enter the next level of operation.
.
.
Step 3: select "accept" to display the "network / USB" status interface.
select "system settings" to enter the setting interface, Select "network settings" to enter the setting interface.
if you use wired connection, select "LAN settings."
using wireless USB network card to connect is to use "wireless network settings" (when setting the wireless network settings, insert the USB wireless network card).
Set the "IP address" respectively.
select "network settings" to enter the setting interfaceGenerally, "automatic acquisition" is used.
If a fixed IP address is used,
select "manual setting". If there is no IP address, Please ask for the IP data provided by the network operator.
fill in one by one according to the IP data provided by the operator.
.
Step 4: after setting the IP address, please confirm by the confirmation letter.
if the network connection is successful, the "setting XX network is successful" will be displayed.
.
Step 5: exit the system setting and you can browse the web page and other items (when setting, you must insert a U disk or mobile phone into the USB port) Hard disk and other storage devices).
.
.
.
.
Hot labels
Related topics