What kind of set top box is better for sharp lcd-46ds20a
Author:Huang Yanming Time:2021-09-10 12:27 Browse(403)
Canling u6r set-top box is good ~ ~ ~ I'm using the set-top box now, and it's also a four core set-top box. It's good to use~
Canling u6r set-top box is good ~ ~ ~ the set-top box I'm using now, and it's also a four core set-top box. It's good to use.

What kind of set top box is better for sharp lcd-46ds20a

connect Sharp LCD 32ds15a with the set-top box.
.
I. cable digital TV set-top box.
1. First, connect the cable signal line (white) to the signal input port of the back board of the set-top box<
2. Connect the set-top box and TV with the corresponding color of audio cable and video cable [audio cable (red and white).
video cable (yellow)].
.
if both the set-top box and TV are high definition.
HDMI cable can also be used to connect the HDMI interface between the TV and the high definition set-top box.
.
3 After the corresponding lines are connected correctly.
it is necessary to check whether the signal line and audio and video line are loose then use the TV remote control to convert the signal source to the video signal source input by the corresponding set-top box<
5. After automatically searching for programs,
you can watch TV programs normally.
.
.
2. Network set top box.
1. Turn on both network set top box and TV
2. Connect the network cable to the network port behind the network set-top box.
when the IP is automatically obtained, the network is successfully connected
3. Connect the set-top box and TV with the corresponding color of audio cable and video cable [audio cable (red and white).
video cable (yellow)] and connect the set-top box power adapter; If both STB and TV are HD, HDMI cable can also be used to connect HDMI interface between TV and HD STB.
.
4. After installation.
4Switch the signal source of the TV to the video signal source consistent with the input of the set top box.
.
3. Satellite set top box.
1. When installing the set top box.
first, connect the satellite signal cable to the signal input port of the back board of the set top box
2. Connect the set-top box and TV with the corresponding color of audio cable and video cable [audio cable (red and white).
video cable (yellow)]; If both STB and TV are HD, HDMI cable can also be used to connect HDMI interface between TV and HD STB.
.
3. After the corresponding line is connected correctly.
check whether signal cable and audio and video cable are loose then use the TV remote control to convert the signal source to the video signal source input by the corresponding set-top box<
5. Select the corresponding satellite.
set parameters, and then search for programs. After searching for programs, you can watch TV programs normally.
.
.
2
Related topics