Who knows the menu of Chimei LCD factory
Author:Lou Xincong Time:2021-08-06 08:04 Browse(109)
LCD factory menu access is to see the display brand of it, do not turn off the screen
Acer (Acer).
1. In the off state.
Press and hold the auto and menu keys first, and then press the power key to power on.

Who knows the menu of Chimei LCD factory

2. After power on.
release all the buttons.
3. Press the menu key again.
at this time, the menu will pop up on the desktop, but there is an F word in the upper left corner.
4 Then press the left button of the menu.
move the icon to F.
5. Press the menu key.
to enter Acer Factory mode.
.
2. BenQ.
early products of BenQ.
1. In shutdown state.
Press and hold the "menu" key and "exit" key first, and then press the power key to start the machine.
2. Press the "I" key after startup to enter Acer Factory mode.
newer products of BenQ.
1 First, turn off the machine.
press the power key, OK key and menu key at the same time.
2. Press "down" after turning on the machine to enter the factory mode.
.
3. LG.
1. In the off state.
Press and hold the "menu" key first, and then press the power key to turn on the machine.
2. At this time, press the menu key to enter the factory mode.
.
4. ViewSonic.
1 In the shutdown state,
Press and hold the "2" key first, and then press the power key.
2. After the display is turned on,
press the "1" key to enter the menu.
3. At this time, there is an additional "factory menu" option in the menu options.
4. At this time, press the "2" key to enter the factory mode.
4
5. Samsung.
1. Set the brightness and contrast value to 0 respectively in the OSD menu.
2. Enter the information item in the menu.
Press and hold the "source" key for 5 seconds to enter the factory mode.
.
(some Samsung displays do not have the source key.
pressing the Enter key at this time has the same effect).
.
6. Philips.
1 In the off state.
Press and hold the "auto" and "menu" keys at the same time, and then press the "power" key to open the display.
2. Press the "menu" key to open the OSD menu.
new options will appear in the OSD menu.
3. Select the OSD cursor.
4 Press enter to enter the factory mode.
(some models need to press and hold the "auto" and "OK" keys at the same time to start up.
open the OSD menu to enter).
.
7. Dell.
1. In the off state.
Press and hold the "auto" and "+" keys at the same time, and then press the power key to turn on the display.
2. Press the "menu" key again.
3 At this time, there will be one more "factory" option in the final factory reset option in the menu.
4. Select and press "enter" to enter.
.
8. AOC.
1. Press menu to call up the main menu.
2. Move the cursor to the full screen zoom icon.
long press menu to open the AOC engineering mode menu.
2(9) HP (HP).
1. Turn off the screen display first.
Press and hold the menu key by hand.
2. Turn on the display (hold the menu key).
until a signal appears. After the signal disappears, release the menu key.
3. Press the menu key again. A menu will appear.
.
10. EMC:
the method of EMC monitor entering factory mode is very special.
unplug the power cord, Press and hold the up key, then plug in the power cord and turn on the power switch. After a while, the OSD menu will appear on the screen to enter the factory adjustment mode.
.
.
11. TCL:
press the "menu" key to call out the OSD menu.
press the right key to move the cursor to the "zoom" position, and press "menu" twice until the factory mode adjustment menu appears.
founder The direction is similar to that of the MCU used in TCL display.
the way to enter the factory mode is similar.
.
I hope it will be useful to you.
.
.
.
.
.
.
.
Related topics