How does AOC e2343f enter engineering mode? View panel information
Author:Zhang Shuling Time:2021-08-05 14:36 Browse(606)
The way to enter the engineering mode is to press and hold the OK key between menu and turntable at the same time when the machine is turned on, and then press and hold the OK key and left key at the same time when the machine is turned off and restarted( At the same time, pressing and holding the OK key between menu and turntable is also the way to restart the machine.)
The way to enter the engineering mode is to press and hold the OK key between the menu and the turntable when the machine is on, and then press and hold the OK key and the left key when the machine is off and restarted.

How does AOC e2343f enter engineering mode? View panel information

(pressing and holding the OK key between the menu and the turntable is also the way to restart the machine).
please take it.
thank you these functions are not open to ordinary users.
enter through special ways.
maintain the display by modifying memory data or other ways.
Second, what can factory mode do? Because different display manufacturers have slightly different definitions of some functions.
for example, some rarely used items such as collective distortion, linear distortion, convergence, color purity, accelerating pole voltage, etc., when the display has some software faults, it can be used to solve the problems without repairing the circuit.
the software faults mentioned here refer to brightness, color, color purity, convergence, Set distortion, line distortion, position and size, etc. if the user's display is not on, or jitters, or the fault caused by circuit components, it can not be solved by factory mode.
thirdly, what are the consequences of improper operation of factory mode? Because the built-in functions of factory modes of different manufacturers are different.
some monitor factory modes are just a little more than ordinary functions.
improper adjustment will only affect the display effect.
however, some manufacturers have rich factory mode functions.
careless misoperation may have a great impact on the display, For example, some functions of the display will be affected, and even the display will not work normally.
therefore, we advise you to be careful when using factory mode.
we suggest that you use factory modeIt's better not to tune a function disorderly before you know it. We are not responsible for the consequences.
however.
because some important parameters such as the accumulated usage time or the date of manufacture of LCD, and even the type of LCD panel are stored in the engineering mode, it's very important for the friends who buy LCD, It's also an important way to check whether LCD is a new product in factory mode, and it also provides important reference value for friends who buy second-hand LCD, because the shorter the use time, the more worthy it is to buy.
so.
we announce the method of entering factory mode for famous brand LCD in the market, hoping to help you when you buy LCD, At the same time, let's compare the information provided by different display manufacturers in factory mode.
Acer: in the off state.
first press and hold the "auto" and "menu" keys at the same time, and then press the "power" key to open the display.
at this time, press the "menu" key to open the OSD menu.
you will find that the OSD menu does not appear in the center of the screen as usual, But on the left side of the screen, the red "F" symbol appears in the upper left corner. Use the left and right keys to adjust the cursor to the "F" symbol, and then press the "menu" key.
Mingji: the way to enter the factory mode is: in the off state.
while holding down the "menu: and" exit "keys, Press the "power" key to turn on the display.
after power on, press the "I" key.
LG: in the off state.
Press and hold the "menu" key first, then press the "power" key to turn on the display, call out the OSD menu, new options will appear at the end, and you can enter.
upai: in the off state.
upai: in the off statePress "2" and press the power button to turn on the display, and the indicator light is yellow.
then press "1" to open the menu.
the "F" character appears in the lower right corner.
move the cursor to the top and press "2" to turn on.
Kaixin AFIN 2008-1-12 00:07 Samsung: in the power on state.
first, adjust the brightness and contrast value to 0 in the OSD menu, Next, enter the "information" page of OSD menu. Hold the "source" key for 5 seconds, and the "service function" menu will appear in the center of the screen. Some Samsung monitors don't have the source key, and pressing the "enter" key at this time will have the same effect. Philips: in the off state, hold down the "auto" and "menu" keys at the same time, Then press the "power" key to open the display.
at this time, press the "menu" key to open the OSD menu.
new options will appear in the OSD menu, which can be entered after selection.
(some models need to press and hold the "Auto" and "OK" keys at the same time to start up.
open the OSD menu to enter) Dell: in the off state, press and hold the "enter" key and "+" key at the same time, Press the power button again to turn on the display.
press the "menu" button again.
be careful when using the factory mode.
it's better not to adjust disorderly until you don't know a function. After all, most users are not very familiar with the display, When entering factory mode, the display will be disordered or even lost.
ViewSonic: in the off state.
first press and hold "2" and press the power button to turn on the display, and the indicator light will be yellow.
when entering factory mode, the display will be disordered or even lostThen press "1" to open the menu.
the "F" character appears in the lower right corner.
move the cursor to the top and press "2" to open the menu.
after entering the back menu options, there is an additional "factory menu" option.
Dell: in the shutdown state.
press the "enter" key and "+" key at the same time, Then press the power key to turn on the display.
press the "menu" key again.
AOC: press the menu to call up the main menu.
move the cursor to the full screen zoom icon, and press the menu for a long time to see the AOC factory mode menu.
Great Wall: press and hold the menu key first, then press the power key.
after the display is turned on, press the menu key again, HP: turn off the display - press and hold the menu.
and then press the power switch - keep the menu until you see the search signal, and wait for the search signal to disappear - release the menu key, press the menu key again, and then you will see an English menu, and then you will find the information on the panel.
.
HP
Related topics