How to change the manufacturer information of the assembled LCD, what equipment to change, or hardware facilities to change? Can we do it with software?
Author:Niu Niu loves Ma Ma Time:2021-08-05 09:38 Browse(237)
Personal can not be changed, the general factory on the preparation of a good program written to MCU.
Personal can not be changed, the general factory on the preparation of a good program written to MCU.. The required tools are as follows:. 1. Use ISP tool, ISP novatek or debug tool and other tool software (the software is different according to the scheme used), and install other related software when installing the above software;. 2. A VGA cable with clock and data pins;. 3. Screen matching software (generally can be used, but different LCD screens may not be bright or colorful);. 4. Burning tools.. In fact, the mechanism inside the display is very simple, that is, the motherboard; The booster board and liquid crystal panel are composed, of which liquid crystal panel is the most important. Its quality is directly related to the service life of the monitor! If it's a self-assembled display and something from the original factory, there must be a difference, but it may not be found in a short time. You'll know after a long time!. As for how to distinguish, there are many ways. I recommend one that you can try. First turn off the monitor, then press the menu key and plus key of the monitor at the same time with your hand, and then turn it on. In this way, a window will come out, and there is a product serial number at the top of the window, This serial number should be the same as the serial number on the carton of the monitor. If it is not or not, it belongs to your own assembly!. I am engaged in the display industry! Finally, good luck!.

How to change the manufacturer information of the assembled LCD, what equipment to change, or hardware facilities to change? Can we do it with software?

Related topics