How does AOC e2343f enter engineering mode?
Author:Oh, oh, oh, oh Time:2021-08-05 08:02 Browse(730)
How to enter LCD factory mode 1. What is LCD factory mode?
How to enter LCD factory mode 1. What is LCD factory mode? Factory mode is some functions reserved by manufacturers when designing circuits, which are not open to ordinary users.

How does AOC e2343f enter engineering mode?

enter through special ways.
maintain the display by modifying memory data or other ways.
Second, what can factory mode do? Because different display manufacturers have slightly different definitions of some functions.
for example, some rarely used items such as collective distortion, linear distortion, convergence, color purity, accelerating pole voltage, etc., when the display has some software faults, it can be used to solve the problems without repairing the circuit.
the software faults mentioned here refer to brightness, color, color purity, convergence, Set distortion, line distortion, position and size, etc. if the user's display is not on, or jitters, or the fault caused by circuit components, it can not be solved by factory mode.
thirdly, what are the consequences of improper operation of factory mode? Because the built-in functions of factory modes of different manufacturers are different.
some monitor factory modes are just a little more than ordinary functions.
improper adjustment will only affect the display effect.
however, some manufacturers have rich factory mode functions.
careless misoperation may have a great impact on the display, For example, some functions of the display will be affected, and even the display will not work normally.
so we advise you to be careful when using the factory mode.
it's better not to adjust disorderly until you are clear about a function. We are not responsible for the consequences.
but it is.
because the accumulated usage time or factory date of LCD are stored in the engineering mode, Even some important parameters such as the type of LCD panel,Therefore, for the friends who buy LCD, it is also an important way to check whether LCD is a new product by entering factory mode to check some relevant information, and it also provides an important reference value for the friends who buy second-hand LCD, because the shorter the use time, the more worthy it is to buy.
therefore.
we announce the method of entering factory mode for famous brand LCD on the market, I hope it will be helpful for you to purchase LCD. At the same time, let's compare the information provided by the factory models of different display manufacturers.
Acer: in the off state.
Press and hold the "auto" and "menu" keys at the same time, Then press the "power" key to open the display.
at this time, press the "menu" key to open the OSD menu.
you will find that the OSD menu does not appear in the center of the screen as usual, but on the left side of the screen. The red "F" symbol appears in the upper left corner. Use the left and right keys to adjust the cursor to the "F" symbol, Press the "menu" key.
BenQ: the way to enter the factory mode is: in the off state.
Press and hold the "menu" and "exit" keys, and then press the "power" key to open the display.
after power on, press the "I" key.
LG: in the off state.
Press and hold the "menu" key first, and then press the "power" key to open the display, Call out the OSD menu and new options will appear at the end.
youpai: in the off state.
Press and hold "2" while pressing the power button to turn on the display, At this time, the indicator light is yellow.
then press "1" to open the menu.
the "F" character appears in the lower right corner.
move the cursor to the top and press "2" to open it.
Kaixin AFIN 2008-1-12 00:07 Samsung: in the power on state.
the menu will be turned onFirst, set the brightness and contrast value to 0 in the OSD menu, and then enter the "information" page of the OSD menu. At this time, press and hold the "source" key for 5 seconds, and the "service function" menu will appear in the center of the screen. Some Samsung displays do not have the source key. Pressing the "enter" key at this time will have the same effect, Press and hold the "auto" and "menu" keys at the same time, and then press the "power" key to open the display.
at this time, press the "menu" key to open the OSD menu.
new options will appear in the OSD menu, which can be entered after selection.
(some models need to press and hold the "auto" and "OK" keys at the same time to open the OSD menu.), Press and hold the "enter" and "+" keys at the same time, and then press the power key to turn on the display.
then press the "menu" key.
be careful when using the factory mode.
it is better not to adjust disorderly until you are not clear about a function. After all, most users are not very familiar with the display, When you enter factory mode, the display will be disordered or even lost.
ViewSonic: in the off state.
Press and hold "2" while pressing the power button to turn on the display, At this time, the indicator light is yellow.
then press "1" to open the menu.
the "F" character appears in the lower right corner.
move the cursor to the top and press "2" to open it.
after entering the back menu options, there is an additional "factory menu" option.
Dell: in the shutdown state.
Press and hold the "enter" key and "+" key at the same time,Then press the power key to turn on the display.
press the "menu" key again.
AOC: press the menu to call up the main menu.
move the cursor to the full screen zoom icon and press the menu for a long time to see the AOC factory mode menu.
Great Wall: press the menu key first and then press the power key.
after the display is turned on, press the menu key again, HP: turn off the monitor - press and hold menu.
and then press the power switch - keep the menu until you see the search signal, and wait for the search signal to disappear - release the menu key, press the menu key again, and then you will see an English menu, and then you will find the panel information..
.
.
Related topics