Tianxingjian physical defoamer uses integrated intelligent mechanized operation
Author:Nong Xiuli Time:2021-06-10 18:03 Browse(882)
Tianxingjian physical defoamer uses integrated intelligent mechanized operation, touch screen and OLED forum
Enterprises are always at a loss as to what bubbles are produced in the process of production. Chemical defoamer often does not achieve good defoaming effect. The problem of defoaming agent residues brings difficulty to clean the working tank, and the difficulty of sewage treatment will make enterprises invest more cost. On the other hand, enterprises need other better defoaming products instead of chemical defoamer to solve the problem of bubbles. Tian Xing Jian has independently developed a physical defoaming machine under the urgent need of the enterprise. It can eliminate foam without adding chemical defoamer.3 y: a& V! V The G1 V physical defoamer is used in physical way to liquefy the foam in production by special bubble breaking device, and then return the medicine to the foam water tank. No need to add chemical defoamer can achieve the effect of eliminating foam, and can also turn the foam into a recycling resource. Not only can reduce the foam generated in the production process, but also will not cause two times of contamination of the potable water, and at the same time reduce the quality risk of residual copper, residual gum, short circuit, gap and so on. The COD content will be reduced, the waste water will meet the standard discharge, and the sewage treatment cost will be saved. 4 ` u( a ~* W% m( @Tianxingjian physical defoamer uses integrated intelligent mechanized operation, and the machine is connected with the original operation machine by pipeline, which is not limited by the structure of the original operation machine. The operation is simple, omitting the manual adding mode, saving time, labor and worry. If you have any questions about defoaming, you can call the service hotline 0755-27283191. We have many years of experience and knowledge to answer them for you.* c! _( p$ M/ v$ d6 m: ?% }/ Y/ @. H: ? 8 _ 5 ]- D0 g! c。。
- 1:Why do surface capacitive touch screens use electric field linearization electrodes?
- 2:Gods, why do I have this phenomenon when I draw a schematic diagram?
- 3:Which OCA vacuum laminating machine is suitable for your own use?
- 4:Not completely cured
- 5:The adhesion of ITO is not up to the standard and some areas of it fall off
- 6:Film sensor yellow light process
- 7:On the recovery method of cover plate
- 8:How about the future development of TP industry
- 9:Apple's new patent to prevent the screen from breaking is to install an adjustable vibration isolation pad between the main body of the device and the glass cover
- 10:Cover plate ink for tap water cleaning