What do AOI detectors look at before and after reflow soldering?
Author:rachel Time:2021-06-11 13:32 Browse(502)
What do AOI detectors look at before and after reflow soldering, Touch screen and OLED Forum
AOI detector equipment is placed in front of the furnace mainly to see if the components are stuck askew, if there are components, use tweezers to correct, wrong / leakage / reverse, etc. 4 k1 ~# C    n4 B2 J. H, {( IUnder normal conditions, there will be no mistakes or omissions in the production. The premise is that the first plate printed after the line change should be inspected by the quality assurance personnel for the first time. In addition, the operator should pay attention to the problem of wrong material during the material change. When the operator changes the material, he must find someone else to confirm and sign.0 i3 T! }( ]$ \ AOI detector equipment is placed behind the furnace to check the welding effect, whether there are virtual / continuous welding, solder beads, etc., before the furnace to check whether there are few pieces of chip materials, whether there is offset in the mounting, etc., after the furnace to check whether the welding is good, etc., x" d& E6 }6 C; y) L& X5 X' [: Z6 r& n' P$ I。。。。

What do AOI detectors look at before and after reflow soldering?

Related topics