Metallographic sample pre grinding machine
Author:Linxi Time:2021-06-08 11:24 Browse(577)
In the process of metallographic sample preparation, the pre grinding of sample is an essential preceding process before polishing. After pre polishing the sample, the efficiency of sample preparation can be greatly improved. In order to meet the needs of pre grinding more materials, the diameter of the grinding plate of the machine is larger than that of the domestic similar products, and the rotation speed of the grinding plate is also different from that of domestic products. It is an excellent equipment for sample pre grinding. The working principle of the pre grinding machine: firstly, clean water continuously flows into the rotating grinding plate through the water pipe. Under the centrifugal force of the rotating grinding plate, the sand paper floating on the water surface throws the water under the sand paper out of the plate to form a vacuum. Then the atmospheric pressure presses the sand paper tightly on the grinding plate to perform the pre grinding work. When the rotation of the grinding plate stops, the sand paper will lose this effect, and then the sand paper can be taken down freely. For more laboratory information, please contact Ms. Ju of Suzhou zhongchuangmeng Laboratory Technology Co., Ltd. at 0512-62657551 15501496287.....
- 1:Apple has acquired 12 patents from Pantai, once South Korea's third-largest handset maker
- 2:What should be paid attention to when using vacuum laminating machine?
- 3:Protective film products
- 4:Industry standard of touch screen
- 5:The wireless control of the factory frequency converter is not convenient??
- 6:Solution of linear bubble after full lamination
- 7:Samsung mobile phone has adopted silicon labs c8051f7xx touch screen chip
- 8:The origin of screen printing and its difference from other printing
- 9:Full fit processing - touch photoelectric
- 10:Lihaojie: 19 inch touch screen display